Applications

  • Used in the transfer of water, brine, water-based chemicals, water-based acids, and gelatinous proppant (sand) slurry used at hydraulic fracturing sites

Specifications

  • Iron meeting ASTM standards

Features

  • Manifold designed for efficient fluid flows and reduction of pump cavitation caused by sand fallout
  • Single cast unit eliminates welds: a primary cause for premature leakage/failure
  • Side ports designed for easy pump cylinder inspection
  • Reduced height for ease of installation
  • Email sales@dixonvalve.com or visit dixonvalve.com/bosslps for additional information and configurations.

Construction

  • 1 manifold accommodates both the Weir SPM pump and Gardner-Denver pumps (part # 5PORTM-6T)
  • 5 2" figure 206 female hammer union adapters, two-part epoxy-bonded (part # HUF206200MT)
  • 5 2" figure 206 bull plug style caps (part # HUC206200)
  • 5 bolts 7/16"-14 by 1/2" long, Grade 8 (part # HUBT716X050)
  • 5 1/8" x 20 1/4" King Cable™ (part # WSR1)
  • 1 6" steel sub-union hammer union, threaded, two-part epoxy-bonded (part # HU206600)
  • 1 1" MNPT square head plug, 150# iron, hand tight (part #SHP100)
  • 1 2" MNPT square head plug, 150# iron, hand tight (part # SHP200)
  • 20 bolts ⅞"- 9 by 1¾" long, Grade 8 (part # HHBT875X175)
  • 5 Buna-N O-rings (part # O439BU)
  • 5 7/16" x 1 1/4" OD flat washers (part # HUWAS125OD)
  • 20 7/8" x 2 1/4" OD flat washers (part # HUWAS225OD)
  • 1 Zoomie tag