Used in the fast paced transfer of water and sand slurry at hydraulic fracturing sites.

Interchangeable with current fittings; phase them into your current operation

• Frac fittings: machined iron to ASTM standards; zinc plated
• Nut: forged steel meeting AISI standards
• Nitrile Rubber Oring (O347BU)
• Figure 200 has a metal-to-metal sealing surface and Figure 206 is similar to Figure 200 with a secondary seal to supplement the metal-to-metal design.

Male/female complete assembly

• One-piece design eliminates leak path experienced with two-piece threaded systems
• Long lasting and dependable forged hammer nut
• Durable and safe with reliable hose retention when crimped as specified

Water and petroleum transfer hoses rated from 100 to 300 PSI WP (4:1 SF) have excellent test results with the standard King Crimp ferrules CF400-xxCS)

400 PSI working pressure with a minimum 4:1 safety factor (hose burst: hose working pressure) is only achieved with: 4" size requires heavy duty (HD) crimp ferrules, CF400-6CSHD through CF400-16CSHD and heavy duty stems

Machined malleable iron stems to ASTM A47 standard

Designed to work with Dixon King Crimp Ferrules.