Imagen
EU | es
Imagen
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Atributos
| DE de Tubo |
1/4"
|
|---|---|
| Material |
Acero inoxidable 316
|
| Rosca Hembra |
NPT
|
| Rango de Temperatura |
-325°F to 1200°F (-198°C to 648°C)
|
| Tamaño de Rosca Hembra |
1/4"-18
|
Detalles
Compatibility & Interchange Data
Fully interchangeable with Swagelok® and Parker A-Lok® fittings
Construction
- ASTM material construction
- 316 Stainless Steel
Features
- Double collet (ferrule) swaging action
- Two positive seal points
Installation
- Cut tubing squarely and clean tube end thoroughly to remove burrs.
- Insert tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight.
- Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench.
Note
Instrumentation fittings come completely assembled.
Safety Notes
- Never connect, disconnect or remake a fitting with pressure in the system.
- Make sure all fittings are properly installed.
- It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm.
- For proper sealing it is recommended that the tubing and fittings be of like material.
- Always use proper thread lubricant and sealants on tapered pipe threads.
- Never bleed a system by loosening a fitting.
Specifications
ASTM F 1387 Certified
